Storing The Tire Sealant And Compressor Kit; Jump Starting - Chevrolet Spark 2013 Owner's Manual

10-62 Vehicle Care
13. Replace the tire valve
stem cap.
14. Return the air only hose (10)
and power plug (9) back to
their original storage location.
15. Return the equipment to its
original storage location in the
vehicle.
The tire sealant and compressor kit
has accessory adapters located in a
compartment on the bottom of its
housing that can be used to inflate
air mattresses, balls, etc.
Storing the Tire Sealant
and Compressor Kit
The tire sealant and compressor kit
is located in the rear storage area.
1. Lift the trim cover.
2. Remove the tire sealant
canister (1) and the
compressor (2).
To store the tire sealant and
compressor kit, reverse the steps.
I n f o r ma t i o n P r o v i d e d b y :

Jump Starting

For more information about the
vehicle battery, see Battery on
page 10 20.
If the battery has run down, try to
use another vehicle and some
jumper cables to start your vehicle.
Be sure to use the following steps to
do it safely.
WARNING
Batteries can hurt you. They can
be dangerous because:
They contain acid that can
burn you.
They contain gas that can
explode or ignite.
They contain enough
electricity to burn you.
If you do not follow these steps
exactly, some or all of these
things can hurt you.