License Plate Lamp; Replacement Bulbs - Chevrolet Spark 2013 Owner's Manual

10-26 Vehicle Care
5. Press the new bulb in and turn
clockwise to install the bulb into
the socket.
6. Turn the bulb socket clockwise
to reinstall.
7. Reinstall the lamp assembly and
two screws.

License Plate Lamp

1. Attachment Screws
2. License Plate Bulb
3. Bulb Socket
To replace a license plate
lamp bulb:
1. Remove the two screws (1) from
the license plate lamp assembly.
2. Turn and pull the license plate
lamp assembly down.
3. Turn the bulb socket (3)
counterclockwise and pull it out
of the lamp assembly.
4. Pull the bulb (2) straight out of
the socket.
5. Push the new bulb into the
socket.
6. Install the bulb socket (3) by
turning clockwise into the license
plate lamp assembly.
7. Replace the license plate lamp
assembly by using the two
screws to secure.
I n f o r ma t i o n P r o v i d e d b y :

Replacement Bulbs

Exterior Lamp
Back-Up Lamps
Front Turn Signal/
Parking Lamps
High/Low-Beam
Headlamp
License
Plate Lamp
Rear Turn Signal/
Taillamps
Stoplamp/
Taillamps
For replacement bulbs not listed
here, contact your dealer.
Bulb
Number
921
7444NA
H13
W5W LL
7443 LL
7443 LL