Bulb Replacement; Halogen Bulbs; Headlamps, Front Turn; Signal And Parking - Chevrolet Spark 2013 Owner's Manual

Hide thumbs Also See for Spark 2013:
Table of Contents

Advertisement

10-24
Vehicle Care

Bulb Replacement

For the proper type of replacement
bulbs, see Replacement Bulbs on
page 10 26.
For any bulb changing procedure
not listed in this section, contact
your dealer.

Halogen Bulbs

WARNING
Halogen bulbs have pressurized
gas inside and can burst if you
drop or scratch the bulb. You or
others could be injured. Be sure
to read and follow the instructions
on the bulb package.

Headlamps, Front Turn

Signal and Parking

Lamps

High/Low-Beam Headlamp
1. Connector Retaining Tab
2. Connector Release
3. Headlamp Bulb
I n f o r ma t i o n P r o v i d e d b y :
To replace a headlamp bulb:
1. Open the hood. See Hood on
page 10 4.
2. Remove the connector
retaining tab (1).
3. Disconnect the wiring harness
connector from the bulb (3) by
pressing the connector
release (2) and pulling
straight back.
4. Remove the bulb (3) from the
headlamp assembly by turning
counterclockwise and pulling
straight back.
5. Install the new bulb in the
headlamp assembly by turning
clockwise.
6. Install the wiring harness
connector to the bulb. Be sure
the connector release (2) locks
into place.
7. Install the connector
retaining tab (1).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents