Headlamp Aiming - Chevrolet Spark 2013 Owner's Manual

2. Press the button (2) in the
middle of the wiper arm
connector, and pull the wiper
blade away from the arm
connector (1).
3. Remove the wiper blade.
4. Reverse Steps 1 3 for wiper
blade replacement.
Rear Wiper Blade Replacement
1. Pull the wiper arm (1) a short
distance away from the glass.
2. Push the blade (2) away from
the arm (1).
3. Once the blade pin disengages
from the wiper arm, remove the
wiper blade by sliding the blade
off the arm.
4. Reverse the steps to install the
new blade.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care

Headlamp Aiming

Headlamp aim has been preset and
should need no further adjustment.
If the vehicle is damaged in a crash,
the headlamp aim may be affected.
If adjustment to the headlamps is
necessary, see your dealer.
10-23