Reduced Engine Power; Light; High-Beam On Light; Daytime Running Lamps - Chevrolet Spark 2013 Owner's Manual

vehicle serviced by your dealer.
If the system is working normally,
the indicator light turns off.
If the light stays on and the engine
does not start, there could be a
problem with the immobilizer
system. See Immobilizer Operation
on page 2 9.

Reduced Engine Power

Light

The reduced engine power light
should come on briefly as the
engine is started. If it does not come
on, have the vehicle serviced by
your dealer.
This light, along with the malfunction
indicator lamp, displays when a
noticeable reduction in the vehicle's
performance occurs. Stop the
vehicle and turn off the ignition. Wait
10 seconds and restart the vehicle.
This might correct the condition.
The vehicle can be driven at a
reduced speed when the reduced
engine power light is on but
acceleration and speed might be
reduced. The performance could be
reduced until the next time the
vehicle is driven. If this light stays
on, see your dealer as soon as
possible for diagnosis and repair.

High-Beam On Light

This light comes on when the
high-beam headlamps are in use.
See Headlamp High/Low-Beam
Changer on page 6 1 for more
information.
I n f o r ma t i o n P r o v i d e d b y :
Instruments and Controls

Daytime Running Lamps

(DRL) Indicator Light

This light, in the display on the top
of the center stack, turns on
whenever the Daytime Running
Lamps are in use.
See Daytime Running Lamps (DRL)
on page 6 2.
5-19