Chevrolet Spark 2013 Owner's Manual page 265

Anytime unusual wear is
noticed, rotate the tires as soon
as possible, check for proper tire
inflation pressure, and check for
damaged tires or wheels. If the
unusual wear continues after the
rotation, check the wheel
alignment. See When It Is Time
for New Tires on page 10 48
and Wheel Replacement on
page 10 52.
Use this rotation pattern when
rotating the tires.
Adjust the front and rear tires to
the recommended inflation
pressure on the Tire and
Loading Information label after
the tires have been rotated. See
Tire Pressure on page 10 41
and Vehicle Load Limits on
page 9 9.
Reset the Tire Pressure Monitor
System. See Tire Pressure
Monitor Operation on
page 10 43.
Check that all wheel nuts are
properly tightened. See Wheel
Nut Torque under Capacities
and Specifications on
page 12 2.
WARNING
Rust or dirt on a wheel, or on
the parts to which it is
fastened, can make wheel
nuts become loose after a
(Continued)
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
WARNING (Continued)
time. The wheel could come
off and cause a crash. When
changing a wheel, remove any
rust or dirt from places where
the wheel attaches to the
vehicle. In an emergency, a
cloth or a paper towel can be
used, however, use a scraper
or wire brush to remove all
rust or dirt.
Lightly coat the center of the
wheel hub with wheel bearing
grease after a wheel change or
tire rotation to prevent corrosion
or rust build-up. Do not get
grease on the flat wheel
mounting surface or on the
wheel nuts or bolts.
10-47