Storing The Tire Sealant And Compressor Kit; Tire Changing - Chevrolet Captiva 2007 Owner's Handbook Manual

274 Vehicle Care
The tire sealant and compressor kit
has an accessory adapter located in
a compartment on the bottom of its
housing that may be used to inflate
air mattresses, balls, etc.
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unwrap both hoses.
2. Slide the canister away from
the compressor housing.
3. Unscrew the hose connected
to the canister.
4. Replace with a new canister
which is available from your
dealer.
5. Attach the hose to the canister
and tighten.
6. Slide the new canister into
place. Make sure it sits in the
compressor housing socket.
7. Replace both hoses to their
original location.
Storing the Tire Sealant
and Compressor Kit
To access the tire sealant and
compressor kit:
1. Open the liftgate. Liftgate 0 33.
2. Lift the cover.
3. Remove the tire sealant and
compressor kit.
To store the tire sealant and
compressor kit, reverse the steps.

Tire Changing

Removing the Spare Tire and
Tools