Splash Guard Installation; Pre-Start Inspection - MK Diamond Products MK-170 Owner's Manual

MK-170 Tile Saw

Splash Guard installation

(A)
Install the Thumbscrew through
the Washer and Splash guard
then align to the hole found on the
hole found on back of the Blade
Guard and tighten.

Pre-start inspection

Prior to beginning work, a pre-start inspection of the saw should be preformed.
(A)
Ensure the ON/OFF Switch is
in the OFF position.
(D)
Inspect the MK-170 for dam-
age - ensure the cord is free of
cracks or cuts.
(B)
Inspect the Pump Assembly of
damage - ensure the cord is
free of cracks or cuts.
18
(C)
Inspect the Diamond Blade for
damage - verify the blade is cor-
rect for the material being cut.
SeTUP