Create your own label
1
Press the + or - button to select Label: and create
your own label (up to five characters) using the built-in
characters.
A B C D E F G H I J K L M N O P Q R S T
s t u v w x y z 0 1 2 3 4 5 6 7 8 9 .
1
Press the
button when
MENU
to display the following.
2 Press the
button again to select the first position.
M E N U
3 Press the + or -button to display one of the built-in
characters. Then press
M E N U
4 Press the + button to move to the next position. Repeat
steps 2 and 3 above until you have entered up to five
characters in your label.
Notes: To erase a character, enter a blank space.
a button
If you do not press
menu will disappear from the screen and you will have to
MEM
re-enter the characters.
5 When you are finished, press the + button to move the
underline highlight to the asterisk (*), and press the
button (remove underline) to enter your label.
Label: You Enter
is underlined
to enter the character.
within a few seconds, the
CHANNEL
M E N U
6 Continue to label channels by entering the channel number in
Channel
the
function and selecting a label with the
function. When you are finished, highlight
button.
MENU
Erasing Channel labels
with menus
Display the
menu on the TV screen. To erase a
N
MEM
CHAN
EL
channel's label, enter the number of the channel in the
function. The currently tuned channel will automatically appear
Channel
in the
function.
Enter channel
number here ---)
Press the + or - button to highlight the
Then press the
button to erase the label.
M E N U
When you are finished, press the + or-button to highlight
and then press the
button.
M E N U
Note: After a few seconds, the
disappear from the screen if no button is pressed. You can also quickly
remove the menu by pressing the
control.
L a b e l
Done
and press the
Channel
Erase Label
function.
Done
menu will automatically
CHANNEL
MEM
button on the master
remote
CLEAR