Adding and Erasing Channels in Channel Memory
1 Display the
(memory) menu on the TV screen.
CHANNEL MEM
Press the
MENU
button to
.
display the
MAIN MENU
Repeatedly press the +
or - button to highlight
in white.
Setup
Press the
button
MENU
again to display the
Repeatedly press the + _
or-button to highlight
Channel memory
in whitt
Press
the
MENU
button
again to display the
CHANNEL MEM ItletIU.
channel memory scan list, press
Channel
function. Then press + for a channel with a higher
number or - for a channel with a lower number.
Note: The channel number to which
automatically appear in the Channel function.
3
Press
MENU
to exit (remove underline) the
and then press + or - to highlight the
function.
to
select (underline) the
M E N U
the TV is currently tuned will
Channel
function,
Scan List: in/out
List: in)
Press
MENU
to add (Scan
selected channel in the channel memory scan list.
To add a channel, press
MENU
l
in.
function to Scan List:
To erase a channel, press
M E N U
l
in/out
function to Scan List: out.
5 When you are finished, press the + or -button to highlight
Done
and press the
MENU
button.
Note: After a few seconds, the CHANNEL MEM menu will
automatically disappear from the screen if no button is pressed.
Pressing the
button on the master remote control will quickly
CLEAR
remove the menu from the TV screen.
Adding Video Input Channels to the Channel Memory
Scan list
You can add video input channels (91 and 92) to the
channel memory scan list. If you have a video device
(such as a VCR, camcorder, or laser disc player) connected
INPUT
to the
jacks on the back of the TV, you can view its
signal by pressing the
button, selecting channel 91 or
INPUT
92 with two number buttons on the master remote, or
adding channels 91 and 92 to the channel memory scan
list.
Add channel 91 to the channel memory scan list to view
the signal from
and add channel 92 to view the
INPUT I
2.
signal from
Adding channels 91 and 92 to channel
INPUT
memory allows access to the video inputs by pressing the
CHANNEL
or erase
(Scan List: out) the
to
Scan List: in/out
change the
Scan List:
to change the