Using The Scan Image Engine - Honeywell Dolphin 9700 Quick Start Manual

Using the Scan Image Engine

1. Tap Start > Demos
2. Point the Dolphin's terminal at the bar code.
3. Project the aiming beam or pattern by pressing and
holding the SCAN key
side buttons.
4. The red LED lights.
5. Center the aiming beam over the bar code; see
Aiming Options
6. When the bar code is successfully decoded, the LED
changes to green and the terminal beeps.
7. The bar code information is entered into the
application in use.
12
> Scan Demo
SCAN
on page 13.
or one of the terminal's