Using The Scan Image Engine - Honeywell Dolphin 99EX Quick Start Manual

Using the Scan Image Engine

1. Tap
2. Point the Dolphin's terminal at the bar code.
3. Project the aiming beam or pattern by pressing and
holding the SCAN key
side buttons.
4. The red LED lights.
5. Center the aiming beam over the bar code; see
Aiming Options
6. When the bar code is successfully decoded, the LED
changes to green and the terminal beeps.
7. The bar code information is entered into the
application in use.
> Demos
on page
> Scan Demo
or one of the terminal's
SCAN
18.
17