External Connections - Johannus Rembrandt 377 AGO User Manual

3.8

External connections

14
The external connections are on the left under the console.
MIDI MIDI
IN MOD.
MIDI IN: This is an input for receiving MIDI codes from other devices.
MIDI MOD.: This is a programmable MIDI output for connecting a
module or expander, for example.
MIDI SEQ.: This is a non-programmable MIDI output for connecting a
sequencer or PC (with the optional Johannus Intonat program), for
example.
AUX IN: This is a (stereo) input for playing the sound of an external
device through the amplifiers of the organ. For example, an expander
that is connected to the organ through the MIDI MOD. can be played
through the instrument's loudspeakers.
The volume of the device that is connected through the AUX IN
cannot be adjusted with the general volume or the expression
pedals. However, this is possible if the volume setting of the
external device is controlled by means of MIDI codes through the
MIDI MOD. connection of the instrument.
AUX OUT: This is an output for connecting an external (stereo) amplifier.
EXT. REV.: This is an output for connecting Johannus external
acoustics. This is a system that imitates the spatial effect of a concert hall
or cathedral.
Do not use this output for other purposes.
L
R
AUX AUX
MIDI
IN OUT
SEQ.
L
R
EXT. PHONES
REV.