Tuning Mode; Temperaments - Johannus Rembrandt 377 AGO User Manual

4.11.4

Tuning Mode

4.11.5

Temperaments

22
Programming the transposer
1. Push the TRANS piston in.
2. Use the - and + pistons to set the pitch.
3. Press the SET piston.
The pitch shift is stored in memory.. When the organ is switched
on again, the programmed pitch will be active.
The Tuning Mode function shifts the pitch in fourteen steps of 1 Hz (from 426
Hz to 454 Hz). The set pitch can be read on the display.
Programming the Tuning Mode
1. Push the MENU piston in.
2. Use the - and + pistons to select the Tuning Mode function on the
display.
3. Push the SET piston in. The display shows the current tuning settings
(Adjust Tune: ...Hz).
4. Use the - and + pistons to set the desired pitch.
5. Push the SET piston in. The selected settings are stored in the memory
and you return automatically to the main menu.
6. Press the MENU piston in to exit the Easy Menu.
The Temperaments function sets the temperament.
This setting cannot be saved. When the organ is switched on
again, this is automatically at Equal.
1. Press the MENU piston.
2. Use the - and + pistons to select the Temperaments function on the
display.
3. Press the SET piston. The display shows the current temperament.