Dnr; Day & Night - Genie CCTV 1000TVL User Manual

This function makes the noise of the low light background decrease and is a highlighted feature.
1. Move the triangular cursor to DNR on the Set Up Menu screen using the Up and Down buttons.
2. Select one of the modes (OFF, LOW, MIDDLE, HIGH) to use DNR by pressing the Right or Left button.
NOTE
* When the DNR function is activated noise cancellation is extremely effective. However, ghosting can
occur if the level is set too high.
The Day & Night menu is used to set the camera video output.
1. Select Day & Night using the Up or Down button on the Set Up Menu screen.
2. Select the desired mode using the Left or Right buttons. (EXTERN, AUTO, COLOUR, B&W)
• EXT : It can change into COLOUR or B&W Mode automatically through the connection with the
ground terminal. Users can adjust SMART-IR Level (0 ~ 20), EXTERN S/W Level, and working time of
the D/N filter.

DNR

MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
Day & Night
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
High Resolution 1000TVL Bullet Cameras
DC
ATW
OFF
MIDDLE
EXTERN
DC
ATW
OFF
MIDDLE
EXTERN
17