Option Port Function—Slt/Door Phone - Xblue Networks 45p Installation & Maintenance Manual

Resource
Option Port Function—SLT/Door Phone
MBC - 4-28
Note:
At default, extensions 36 and 37, are assigned as single line telephones that rings, so once
a door phone is connected it will automatically answer the inbound call.
dual
There are two
Door Phone interface or a Single Line Telephone (SLT) extension interface (analog port).
They cannot be used as both at the same time. When set as SLT extensions, they will oper-
ate as a standard analog line telephone for use with fax machines and modems, etc. When
set to Door Phone, they will integrate with the systems' proprietary Door Phone. The pro-
gramming parameters for the two Option Port Functions are:
• Utility
• Ring Type
• Ring Position
this parameter assigns the Day Mode ringing destination whenever the Door
Phone Call Button is pressed. Ringing destinations can be extensions or Hunt
Groups.
• Ring Position
use, this parameter assigns the Night Mode ringing destination whenever the
Door Phone Call Button is pressed. Ringing destinations can be extensions or
Hunt Groups.
• Maximum Ring Time
at the extensions/hunt groups will continue until this timer has elapsed. This
is provided to cancel ringing when the call goes unanswered.
• Unlock code
Option Board. It is often used to trigger a solenoid-activated door lock
whereby the telephone user can open the door by dialing this code while con-
nected to the Door Phone.
• Open Indication
may remain connected once it places a call. Open indication can be limited
from 01-60 seconds. A setting of "00" removes the limit function.
• Door Relay
to this port. (When a Relay is associated to the port, the relay will operate
when the user dials the Unlock Code.)
Data Range (Default Range in Bold) "p" 1 or 2 (N/A) "o" =
162
use ports on the Option Board. These two ports can be set for use as a
– Single Line Telephone (analog port) or Door Phone.
– Ring (the only option available)
(Day) – When the port has been selected for Door Phone use,
(Night) – When the port has been selected for Door Phone
– Once the Door Phone Call Button is pressed, ringing
– This code is used with a contact closure provided on the
– Open indication is the amount of time that a door phone
— Use this setting to link any of the four available relay contacts
XBLUE Networks