Ldap Commands - Lucent Technologies Cajun Switch P220 Release Note

LDAP Commands

Table 1-9 shows new and changed LDAP commands in Release 4.0.1:
Old Command
ldap debug <debug-
level>
To Enable:
ldap producer-signal
<producer-signal>
To Disable:
[no] ldap producer-
signal <producer-
signal>
To Enable:
ldap search-base
<search-base-dn>
To Disable:
[no] ldap search-base
<search-base-dn>
To Enable:
ldap server primary
<ip-addr> [<port-num>]
To Disable:
[no] ldap server
primary <ip-addr>
[<port-num>]
To Enable:
ldap server secondary
<ip-addr> [<port-num>]
To Disable:
[no] ldap server
secondary <ip-addr>
[<port-num>]
Cajun P220, P550, P550R Switch Release Notes, Release 4.0.1
Table 1-9: LDAP Commands
New Command
N/A
N/A
To Enable:
N/A
To Disable:
[no] ldap search-base
To Enable:
N/A
To Disable:
[no] ldap server
primary
To Enable:
ldap server secondary
<ip-addr> [<port-num>]
To Disable:
[no] ldap server
secondary
New Definition/Argument
Command removed from CLI.
Command removed from CLI.
Please note the change to the no form
of the command.
The default port is 389.
Please note the change to the no form
of the command.
The default IP address is 0.0.0.0.
Please note the change to the no form
of the command.
32