Send All Calls - Lucent Technologies Voice Terminal 8434DX Quick Reference

3 To set your selected ringing pattern:
if your 8434DX has a
when you hear the desired ringing pattern;
if your 8434DX has a
anymore. You will hear the selected ringing
Ring
pattern two more times, and then it will be
automatically saved.
You hear confirmation tone.
To adjust ringer volume if necessary (speaker is
not active)
1 To raise the volume, press the right half of the
Volume control button labeled
volume, press the left half of the Volume control
button labeled

SEND ALL CALLS

To send all calls (except priority calls) immediately
to coverage
1 While on-hook, press softkey below SAC
(if shown on the display)
or Press
or Dial Send All Calls access code _______.
To cancel Send All Calls
1 While on-hook, press softkey below SAC
(if shown on the display)
or Press
or Dial Send All Calls cancel code _______.
SPEAKERPHONE
NOTE: To use this feature, your voice terminal must
be set for the Speakerphone (speak and listen)
feature.
To place/answer a call without lifting the handset,
or to use speakerphone with any feature
1 Press
Speaker
2 Place or answer call, or access selected feature.
3 Adjust speakerphone volume if necessary:
To raise the volume, press the right half of the Vol-
ume control button labeled
ume, press the left half of the Volume control button
labeled
.
Send Calls
Send Calls
.
.
button, press
Shift
button, don't press
Ring
; to lower the vol-
8
Shift
; to lower the