GAYLORD Ultima Vent GX2-UV Technical Manual page 6

"GX2-UV" SERIES PRINCIPLE OF OPERATION
CLEANING
At the end of the cooking day the exhaust fan is turned off at
the CUV-100 control. After the fan has been turned off, the
extractor inserts and particulate separators are removed and
can be washed either in a dishwasher or soaked and rinsed
off. The grease cup is also removed and emptied at this time.
To ease in the removal of the extractor inserts, an "Extractor
Removal Tool" is available which eliminates the need for
kitchen personnel to climb up on the cooking equipment, or
up a ladder.
The UV lamps will develop a coating of dust. This coating must
be removed for optimum performance. Therefore, once a week
while the cartridges are removed, inspect the lamps and clean
as needed. Use a clean dry cloth and if necessary wash with
mild detergent and water first.
FIG. 2
6