Table of Contents
Advertisement
Operation
To Transmit
To Transmit
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged trans-
mitting without an antenna, or
a poorly matched antenna,
could cause damage to the
transmitter.
Be sure to read the F.C.C. Rules
1
Select desired
and Regulations included with
this unit before transmitting.
Setting
Setting Dynamike®
®
Dynamike
This controls the microphone sensitivity
(outgoing audio level).
1
Initially, set fully
mum voice volume is available. Dynamike®
may have to be reduced in some conditions.
16
channel.
clockwise so that maxi-
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Transmit
PUSH &
HOLD
Push and hold mic button to transmit.
1
Transmitter is now activated. When transmit-
ting, hold the microphone two inches from
your mouth and speak in a clear, normal voice.
Release to receive.
RF Meter
This meter swings proportionately to the RF
output (outgoing signal) while transmitting.
Operation
Transmit
RF Meter
17
Hide quick links:
Advertisement
Table of Contents
