Home And Office Set-Up
Base Station
Base Station Operation
(From 120V AC House Current)
Operation
(From 120V AC
To operate your transceiver from home or office
House Current)
you will need a 13.8 volt DC Power Pack rated at a
minimum of 2 amps, and a properly installed
base station antenna.
Warning!
Do not attempt to operate this
transceiver by connecting it
directly to 120 vac.
Note
For further information call
Cobra Customer Service
1.773.889.3087.
Simply connect the red (+) and black (-)
1
leads of the transceiver to the corresponding
terminals of the power pack.
22
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Home And Office Set-Up
2
Plug power cable into back of unit marked
"Power". Be sure to observe polarity markings.
3
Connect properly installed and matched base
station antenna.
23