Of Autostar Ii Software; Starlock Assisted Pec Training; Update Menu Option; Erase Menu Option - Meade LX850 Instruction Manual

Easy Polar Alignment
Easy Alignment is similar to Two-Star Polar Alignment,
Autostar II, rather than the user, chooses two stars
its library and merely asks the user to center them in
the eyepiece.
To Download the Latest Version of
Autostar II Software
Included with your telescope is a DVD ROM and a
USB cable. You need to install the USB drivers, that
are included on the DVD ROM, BEFORE plugging in
the cable:
1 Select "USB Drivers" from the DVD ROM.
"Finish" buttons when asked to do so).
3. Select Autostar Suite on the DVD ROM to install
Autostar Suite onto your PC. Follow the on-
screen instructions.
4. Once the Autostar Suite software installs, double-
click the new "Autostar Suite" icon on the desktop.
5. Go to the Telescope menu and select "Update
Autostar." The "Autostar
displays. Click the "Upgrade Autostar Software
Now" button.
6. The application detects your telescope type and
7. A window displays asking if you wish to download
the latest version of Autostar from your hard drive
(if you previously downloaded it separately from the
Meade website) or from the Internet. Select one of
the choices and follow the on-screen instructions.
8. The download will take about 10 minutes (download
time depends on your Internet connection, speed of
your computer and so forth). When the download
is complete, the new version of the Autostar
software displays.

Starlock Assisted PEC Training

Periodic Error Correction (PEC) helps to remove the
slight perturbations in tracking that occur due to the
mechanical nature of a telescope. Follow the steps
below to perform this procedure using StarLock:
1. Point the telescope's OTA at a moderately bright
star near 0 declination (celestial equator).
2. Wait for the StarLock indicator lamp to stop
4. Scroll through the options until "Telescope: RA
5. Scroll through the options until "RA PEC: Train"
6. Scroll through the options until "RA PEC: Update"
7. Repeat step 6 one more time to improve the

Update Menu Option

is recommended that you update your original training
Update does not overwrite the data, but updates the
training using information gathered from both the last
and the current training sessions. Press the MODE
Update" screen
the procedure.

Erase Menu Option

Select this option to erase all PEC training data.

On and Off Menu Options

Select "On" when you want the telescope to use the
training information. Select "Off" when you do not want
for the telescope to use the training information. Select
"On" to enable the Smart Drive.
blinking and become solid red, which indicates
that it has located and locked onto the guide star.
"Setup: Telescope" menu. Press ENTER.
PEC" displays. Press ENTER.
displays. Press ENTER.
displays. Press ENTER.
PEC training.
43