Install The Main Battery Pack - Honeywell Dolphin 99EXLG Series Quick Start Manual

Install the Main Battery Pack

The 99EX is shipped with the battery packaged separate
from the terminal. Follow the steps below to install the
main battery. For information on how to remove the
battery, see page
Before you attempt to use, charge, or replace the battery in
the terminal, carefully read all the information under
Equipment for Use in Hazardous Locations
1. Release the hook securing the hand strap to the back
panel of the terminal.
2. Remove the battery door by lifting up the latches near
the base of the battery door.
3. Insert the battery into the battery well.
Ensure all components are dry prior to placing the battery in
the terminal. Mating wet components may cause damage not
covered by the warranty.
4. Replace the battery door. Apply pressure to engage
the door latch. The battery door must be installed
prior to powering the unit.
5. Reattach the hand strap.
8
9.
2
(see page 1).
3