4. Set the alarm output button.
This setup is for the alarm output button in the monitoring page.
Mode: Sets the alarm output method.
There is difference between operations when clicked alarm output button while disabled.
- Pulse : It is activated during the time period specified by the duration (switching
interval) and then becomes inactive automatically.
- Active/Inactive : It maintains as activated until the user clicks the button again to
make it inactive.
Duration : Set the alarm duration that maintains activated if the mode is set to
pulse, from 1 to 15 seconds.
5. When done, click [Apply (
SYSTEM SETUP
Product information
1. From the Setup menu, select the
<System (
2. Click <Product information>.
3. Check the encoder information, or
provide details according to your
network environment.
Model : Model name of the product.
Serial number : Product serial number.
Device name : Provide a device name that will be displayed on the Live screen.
Location : Specify the location where the encoder is installed.
Description : Provide detailed information about the encoder location.
Memo : Provide an explanation about the encoder for better understanding.
Language : Select a preferred language for the Web Viewer OSD.
M
The default language is set to <English>.
4. When done, click [Apply (
)].
)> tab.
)].
English _79