Network Setup - Samsung SPE-400 User Manual

NETWORK SETUP

Interface
1. From the Setup menu, select the
<Network (
2. Click <Interface>.
3. Set the <Interface> and <IPv6 setup>
as necessary.
 IP type : Select an IP connection type.
- Manual : Specify the IP address,
Subnet mask, Gateway, DNS1,
and DNS2.
- DHCP : Specify the DNS1 and
DNS2.
- PPPoE : Specify the DNS1, DNS2, ID and Password.

If you set it to <Manual>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.
 MAC address : Shows the MAC address.
 IP address : Displays the current IP address.
 Subnet mask : Displays the <Subnet mask> for the set IP.
 Gateway : Displays the <Gateway> for the set IP.
 DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
4. Set the <IPv6 setup>.

Set to <Use> to use IPv6 address.
 Default : Use the default IPv6 address.
 DHCP : Display and use the IPv6 address obtained from the DHCP server.
 Manual : Enter IP address and gateway manually and use it.
5. When done, click [Apply (

J
The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous
settings will be restored automatically.

Once completed with editing, click [Apply (
After a while, connect again with the changed IP.
)> tab.
)].
)] to apply changes and the browser exits.
English _59