Intended use Do not use the appliance if any part is damaged or defective. Your Black & Decker jump starter with inflator is designed to Have any damaged or defective parts repaired or replaced provide additional power to lead-acid batteries when starting by an authorised repair agent.
When using this unit in proximity to the vehicle's battery and Chargers engine, stand the unit on a flat, stable surface, and be sure Your charger has been designed for a specific voltage. to keep all clamps, cords, clothing and body parts away Always check that the mains voltage corresponds to the from moving parts of the vehicle.
Features Charging the unit with the 12 Vdc vehicle adaptor (fig. A) This appliance includes some or all of the following features: Make sure that the ON/OFF switch (7) and the LED area light 1. Jumper cables (10) are turned off while the unit is being charged. 2.
When the vehicle starts, turn the unit's ON/OFF switch (7) Warning! Do not attempt to use or charge the unit while the 12 to the OFF position. Vdc accessory outlet (3) is in use. Leave the vehicle's engine running. Lift the cover of the 12 Vdc accessory outlet (3). Disconnect the (-) black clamp connected to the engine or Insert the 12 Vdc plug from the appliance into the 12 Vdc chassis first, followed by the (+) red clamp that is connected...
Should you find one day that your appliance Technical data needs replacement, or if it is of no further use to BDV012I you, think of the protection of the environment. 12 V 17 Ah Battery Type Black &...
Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff. To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black &...