Black & Decker PS122 User Manual

Hide thumbs


New Zealand



  Also See for Black & Decker PS122

  Summary of Contents for Black & Decker PS122

  • Page 1 Ireland Australia New Zealand...
  • Page 4: Intended Use

    . This tool is intended for consumer (PS122, PS142, PS182) use only. alcohol or medication. A moment of inattention while Safety instructions operating power tools may result in serious personal injury.
  • Page 5 f. Keep cutting tools sharp and clean. Properly Avoid touching the tip of a drill bit just after drilling,  maintained cutting tools with sharp cutting edges are less as it may be hot. likely to bind and are easier to control. This tool is not intended for use by persons (including ...
  • Page 6 Charge only using the charger provided with the tool. 5. Battery  When disposing of batteries, follow the instructions given 6. Battery charge indicator (PS122, PS142, PS182)  in the section "Protecting the environment". 7. Bit holder Fig. A Chargers Use your Black &...
  • Page 7 Remove the battery from the charger. Screwdriving applications  Checking the battery condition (fig. E) (PS122, PS142, PS182) This tool is fitted with a battery charge indicator, which allows Torque range: low torque for you to check the condition of the battery.
  • Page 8: Protecting The Environment

    Hammer drilling applications Regularly open the chuck and tap it to remove any dust (PS122, PS142, PS182)  from the interior. Protecting the environment Hammer drilling in concrete Separate collection. This product must not be Drilling/screwdriving disposed of with normal household waste.
  • Page 9: Ec Declaration Of Conformity

    EC declaration of conformity Technical data PS122/H PS142/H PS182/H PS122/H, PS142/H, PS182/H, PS12/H, PS14/H, PS18/H Black & Decker declares that these products conform to: Voltage 98/37/EC, EN 60745 No-load speed 0-400/ 0-400/ 0-400/ 0-1200 0-1200 0-1200 Level of sound pressure according to EN 60745: Max.
  • Page 10 To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual.
  • Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...