Iv-7-2. Advanced - Edimax IC-7113W User Manual

IV-7-2. Advanced
The "Advanced" page allows you to upgrade the network camera's firmware,
backup or restore the network camera's settings, and reset or restart the
network camera. Please check the Edimax website for the latest firmware for
your network camera.
Do not switch off or disconnect the device during a firmware
upgrade, as this could damage the device.
Firmware Filename
Upgrade Firmware
Backup Settings
Restore Settings
Restart
Click "Browse" to locate the firmware file on
your computer.
Click to upgrade the firmware to your
selected file.
Click "Apply" to save the current settings on
your computer as config.bin file.
Click "Browse" to find a previously saved
config.bin file and then click "Upload" to
replace your current settings.
Click "Restart Network Camera" to restart the
network camera. Please wait a couple of
minutes for network camera to boot up after
84