Table of Contents
Advertisement
Network Type
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
HTTP Port
Select "DHCP" to automatically assign an IP
address to your network camera from your
router or "Static IP" to manually set a static IP
address using the fields below.
Static IP users specify an IP address here,
which will be the IP address of your network
camera.
Enter the subnet mask of the IP address.
Enter the gateway address of your network.
Enter the IP address of your primary DNS
server.
Enter the IP address of your secondary DNS
server (optional).
You can edit the HTTP port number to any
value between 1024 – 65535. The default
value is 80.
38
Advertisement
Table of Contents
