Package Contents; Static Electricity Precautions; Pre-Installation Inspection - MATSONIC ms9147c User Manual

Hide thumbs Also See for ms9147c:
Table of Contents

Advertisement

Mainboard User's Manual

Package Contents

Your mainboard package contains the following items:
The mainboard
The User's Manual
One diskette drive ribbon cable
One IDE drive ribbon cable
Software support CD
Optional Accessories
You can purchase the following optional accessories for this
mainboard.
Extended USB module
CNR v.90 56K Fax/Modem card

Static Electricity Precautions

Static electricity could damage components on this mainboard.
Take the following precautions while unpacking this mainboard
and installing it in a system.
1. Don't take this mainboard and components out of their original
static-proof package until you are ready to install them.
2. While installing, please wear a grounded wrist strap if possible.
If you don't have a wrist strap, discharge static electricity by
touching the bare metal of the system chassis.
3.
Carefully hold this mainboard by its edges. Do not touch those
components unless it is absolutely necessary. Put this
mainboard on the top of static-protection package with
component side facing up while installing.

Pre-Installation Inspection

1. Inspect this mainboard whether there are any damages to
components and connectors on the board.
2. If you suspect this mainboard has been damaged, do not
connect power to the system. Contact your mainboard vendor
about those damages.
6

Advertisement

Table of Contents
loading

Table of Contents