Kia 2011 RIO Owner's Manual page 54

Placing a passenger safety belt
into the auto lock mode
The auto lock mode will help prevent the
normal movement of the child in the vehi-
cle from causing the safety belt to loosen
and compromise the child restraint sys-
tem. To secure a child restraint system,
use the following procedure.
Installing a child restraint system by
lap/shoulder belt
To install a child restraint system on the
outboard or center rear seats, do the fol-
lowing:
1. Place the child restraint system in the
seat and route the lap/shoulder belt
around or through the restraint, follow-
ing the restraint manufacturer's
instructions. Be sure the safety belt
webbing is not twisted.
Knowing your vehicle
E2MS103005
2. Fasten the lap/shoulder belt latch into
the buckle. Listen for the distinct "click"
sound.
Position the release button so that it is
easy to access in case of an emergency.
E2BLD310
3 41