Engine Oil - Kia 2011 RIO Owner's Manual

Hide thumbs Also See for 2011 RIO:
Table of Contents

Advertisement

ENGINE OIL

Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach
normal operating temperature.
3. Turn the engine off and wait for a few
minutes (about 5 minutes) for the oil to
return to the oil pan.
4. Pull the dipstick out, wipe it clean, and
re-insert it fully.
WARNING -
Radiator hose
Be very careful not to touch the
radiator hose when checking or
adding the engine oil as it may be
hot enough to burn you.
5. Pull the dipstick out again and check
the level. The level should be between
F and L.
OJB050035
If it is near or at L, add enough oil to bring
the level to F. Do not overfill.
Use only the specified engine oil. (Refer
to "Recommended Lubricants" later in
this section.)
CALIFORNIA PROPOSI-
TION 65 WARNING
Engine oil contains chemicals
known to the State of California to
cause cancer, birth defects and
reproductive harm. Used engine oil
may cause irritation or cancer of
the skin if left in contact with the
skin for prolonged periods of time.
Always protect your skin by wash-
ing your hands thoroughly with
soap and warm water as soon as
OJB050036
possible after handling used oil.
✽ ✽ NOTICE
Although oil filters may have the same
external appearance, their internal
designs differ significantly. These filters
are not interchangeable. To avoid poten-
tial engine damage, use only the speci-
fied filter. Consult an authorized Kia
dealer.
Maintenance
7 13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rio

Table of Contents