Kia 2011 RIO Owner's Manual page 123

Knowing your vehicle
®
6. Bluetooth system will repeat the
name you stated.
7. Say "Yes" to confirm.
8. The audio displays "searching ----
passkey: 0000" and asks you to initiate
pairing procedure from the phone.
®
9. Search the Bluetooth system on your
phone .Your phone should display your
[vehicle model name]
®
Bluetooth device list. Then attempt
pairing on your phone
10. After Pairing is completed, your
phone will start
phone/contact list to the audio sys-
tem.
- This process may take from a few
minutes to over 10 minutes depend-
ing on the phone model and number
of entries in the phone/contact list.
11. By manual operation:
- Select "PAIR" in PHONE menu,
thenproceed from step 5
Note:
Until the audio displays "Transfer
®
Complete", Bluetooth
feature may not be fully operational.
3 110
Note:
If the phone is paired to two or more
vehicles of the same model, i.e. both
vehicles are KIA Rio, some phones
may not handle Bluetooth
devices of that name correctly. In this
case, you may need to change the
name displayed on your phone from
Rio to Rio1 and Rio2.
on the
Refer to your phone's User's Guide, or
contact your cellular carrier or phone
manufacturer for instructions.
to transfer
• Connecting phone
When the Bluetooth
the phone previously used is automati-
cally selected and re-connected. If you
want to select different phone previously
paired, the phone can be selected
through "Select Phone" menu.
Only a selected phone can be used with
the hands-free system at a time.
1. Press
2. Say "Set Up".
3. Say "Select Phone" after prompt
hands-free
- The system lists all the registered
phone names.
4. Say the name or number of desired
phone from the list.
®
®
system is enabled,
button.
5. Say "Yes" to confirm.
6. By manual operation:
- Select "SELECT" in PHONE menu,
then select desired phone from the list.
• Deleting Phone
The paired phone can be deleted.
- When the phone is deleted, all the infor-
mation associated with that phone is
also be deleted (including phonebook).
- If you want to use the deleted phone
with the audio system again, pairing
procedure must be completed once
more.
1. Press button.
2. Say "Set Up".
3. Say "Delete Phone" after prompt.
- The system lists all the registered
phone names.
4. Say the name or number of desired
phone from the list.
5. Say "Yes" to confirm.
6. By manual operation:
- Select "DELETE" in PHONE menu,
then select desired phone from the list.