Kia 2011 RIO Owner's Manual page 124

• Changing Priority
When several phones are paired to the
audio system, the system attempts to
connect following order when the
®
Bluetooth system is enabled:
1) "Priority" checked phone.
2) Previously connected phone
3) Gives up auto connection.
1. Press button.
2. Say "Set Up".
3. Say "Change Priority" after prompt.
- The system lists all the registered
phone names.
4. Say the name or number of desired
phone from the list.
5. Say "Yes" to confirm.
6. By manual operation:
- Select "PRIORITY" in PHONE menu,
then select desired phone from the list.
®
• Adjusting Bluetooth Volume
®
Bluetooth system volume can be
adjusted separately from main volume of
the audio system. Volume control is avail-
able by manual operation only.
- Select "BT VOL" in PHONE menu,
adjust volume to desired level by turn-
ing the TUNE knob, then press the
knob again to confirm.
®
• Turning Bluetooth ON/OFF
®
Bluetooth system can be enabled (ON)
or disabled (OFF) by this menu.
®
- If Bluetooth is disabled, all the com-
mands related to Bluetooth
prompts whether you wish to turn
Bluetooth® ON or not.
1. Press button.
2. Say "Set Up"
3. Say "Bluetooth Off" after prompt.
4. Say "Yes" to confirm.
5. By manual operation:
- Select "BT Off" in PHONE menu,
then after announcement, say "YES"
to confirm.
Knowing your vehicle
■
Phone Book (In-Vehicle)
• Adding Entry
Phone numbers and voice tags can be
registered. Entries registered in the
phone can also be transferred.
• Adding Entry by Voice
1. Press button.
2. Say "Phonebook".
- The system replies with all available
commands.
- To skip the information message,
press
heard.
®
system
3. Say "Add Entry".
4. Say "By Voice" to proceed.
5. Say the name of the entry when
prompted.
6. Say "Yes" to confirm.
7. Say the phone number of that entry
when prompted.
8. Say "Store" if phone number input is
finished.
9. Say a phone number type. "Home",
"Work", "Mobile", "Other" or "Default" is
available.
10. Say "Yes" to complete adding entry.
11. Say "Yes" to store additional location
for this contact, or say "Cancel" to fin-
ish the process.
again and then a beep is
3 111