Priority Channel (16/9); Ptt (Push To Talk); Scan - Lowrance LVR-850 Installation And Operation Instructions Manual

To receive a position request:
1. The alarm will sound and P1 will be displayed on the screen in big
digits. The MMSI directory location will be shown next to it, in small
digits.
2. To send your position, press the
3. To ignore the position request, press the
alarm, then press it again to return to the main screen.

Priority Channel (16/9)

The key is used to switch priority channels. When you first turn on
16/9
the radio, its default priority channel is Ch. 16. To switch priority
channels, hold down the
channel switches to the other channel. This is particularly useful when
you want to make a non-DSC call and Ch. 16 is receiving a lot of
transmission traffic. The
tion modes, ignore incoming calls and cancel outgoing calls.
With a quick press of the
selected with high (25W) transmission power. Press the
and it selects the last used channel.

PTT (Push To Talk)

This key is on the microphone. Press and hold it down to send a trans-
mission. There is a 5-minute maximum transmission timer, per FCC
regulations.

Scan

There are three primary scanning modes,
.
P S
RIORITY CAN
CALL
key for a few seconds until the priority
16/9
key also allows you to exit various opera-
16/9
key the priority channel immediately is
16/9
25
key.
key to silence the
16/9
A S , M
LL CAN
key again
16/9
and
S ,
EMORY CAN