Reception - Lowrance LVR-850 Installation And Operation Instructions Manual

3. Press the Call key and the big digit will blink and the channel will
switch to Ch. 16. Press the
sent through Ch. 70. After the transmission on Ch. 70, the ID Annun-
ciator will flash, indicating it is waiting for an
received, another call can be made to send your position to the same
MMSI by pressing the
edged, an alarm will be heard. Press the
4. Press key to return to the main screen.
16/9
To request a position (P2):
1. Press
CALL
2. To edit or enter the P2 location, use the ↑ ↓ keys to select position P2
from the directory. P2 will be displayed in the bottom right corner of
the display. If the P2 location has
MMSI of the vessel from which you're trying to request a position.
and use the ↑ ↓ keys to enter the MMSI numbers, pressing
Press
MEM
after each digit has been entered. When finished, press and hold
MEM
the key for five seconds. The screen will show
CALL
know the MMSI is now stored in the P2 location. The MMSI number
will be stored in the P2 location until you edit or replace the MMSI in-
formation.
3. Press the
CALL
be switched to Ch. 16. Press the
will be requested through Ch. 70. After the transmission on Ch. 70, the
ID Annunciator will flash, indicating it is waiting for an
is not received, another call can be made to request the position of the
same MMSI by pressing the
acknowledged, an alarm will be heard. Press the
alarm.
4. Press key to return to the main screen. The vessel's location will
16/9
be displayed on the GPS map.

Reception

To receive a position send:
1. An alarm will sound and the
the main screen.
2. Press the
16/9
3. If the MMSI number of the vessel sending its location is in your di-
rectory, its directory location will be displayed. If the vessel is not in
your directory, its MMSI number will be displayed.
4. Press to return to the main screen. The vessel's location will be
16/9
displayed on the GPS map.
CALL
, then use the ↑ ↓ keys to select
key and the big digit will blink and the channel will
key to stop the alarm.
key again and the position data will be
CALL
key. When the position send is acknowl-
16/9
in the window, you must enter the
CL
key again and the position data
CALL
key. When the position request is
CALL
Annunciator will be displayed from
ACK
24
. If an
ACK
key to cancel the alarm.
from the main screen.
DIR
FL P2
ACK
key to cancel the
16/9
is not
ACK
, letting you
. If an
ACK