The example shows the MMSI Data 987776510 being entered.
To change or edit MMSI data, select a
location and press the
FL
MEM
key to change the data. After inputting the 9-digit MMSI, hold down
the
key for 5 seconds to store the new MMSI.
CALL
DSC Monitor
To be sure the DSC Monitor mode is on, hold down the
key for 5
CALL
seconds to toggle the DSC Monitor mode off and on. It must be on for
your radio to receive a DSC call. The
will be dis-
DSC MON
ANNUNCIATOR
played onscreen, if Ch. 70 is being accessed. Since there is no independ-
ent Ch. 70 receiver, the radio normally monitors Ch. 70 and checks
other channels on a regular basis to detect a squelch break. This
method ensures the radio will acquire the most DSC calls possible.
21