Table of Contents
Advertisement
↑ ↓
4. Use the
correct verification of the first digit of the MMSI number, touch the
key to advance. The small digit now displays the 2nd character
MEM
position with a
second MMSI digit using
peat the operation until all 9 digits have been entered. Double-check
your MMSI entry, toggling through each individual digit by pressing
the
key. There is no backup or edit mode, so if you make a mistake
MEM
entering the number, you'll have to start over. Press the
or just turn off the radio. After you are satisfied with the new MMSI
number, press the call key.
5. Press the
CALL
is no acknowledgement
call again. The radio will stay in standby mode, indicated by the flash-
ing ID Annunciator, until an
you can press the call key again and the call is placed again. You can
exit the call function at any time by pressing the
To place a non-DSC call:
When making a non-DSC call, you'll have to switch to a communication
channel after making initial contact, so be sure to select a channel
authorized for the type of communication you desire.
NEW and ID Annunciators will blink
Channel
keys to set proper MMSI data for the digit shown. After
as the big digit and
"0"
↑ ↓
key and the radio will transmit the request. If there
(ACK)
Character field
position
"2"
keys and touch the
after 4 seconds, the radio transmits the
is received. If an
ACK
17
as the small digit. Set the
key to store. Re-
MEM
16/9
is not received,
ACK
key twice.
16/9
Ch. 8 is
simplex
working
channel
key to exit
Hide quick links:
Advertisement
Table of Contents
