Fish Alarm - Lowrance M56 S/Map Installation And Operation Instructions Manual

3. To set the upper boundary for the Zone Alarm, use ← or→ to select
, then press ↑ or ↓ to move the top of the bar to the desired depth.
U
PPER
4. To set the lower boundary for the Zone Alarm, use ← or→ to select
, then press ↑ or ↓ to move the bottom of the bar to the desired
L
OWER
depth.
5. Press |← to
EXIT
echo — fish, bottom, structure — within the zone alarm's depth range
will trigger the zone alarm.
6. To turn off the alarm, press
|
S A
ONAR LARMS
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in steps 3 and 4 above.

Fish Alarm

Use the fish alarm for a distinctive audible alarm when fish or other
suspended objects are detected by the Fish I.D. feature (Fish I.D.
must be turned on for the Fish Alarm to work). A different tone sounds
for each fish symbol size shown on the display.
Sonar Alarms menu with Fish Alarm selected. The check box
to the left is checked, indicating the alarm is turned on.
To turn the fish alarm on:
1. Press
MENU
2. Press ↓ to
F
3. To turn off the alarm, press
|
S A
ONAR LARMS
Z A
ONE LARM
|↓ to
ENT Z
ONE
| |↓ to
MENU A
|
A ENT
ISH LARM
|↓ to
ENT F
ISH
|
E ENT
NABLED
|
MENU
A E
LARM NABLED
| |↓ to
ENT
LARMS
| .
EXIT
|
MENU
| |
A ENT EXIT
LARM
46
| |
EXIT EXIT
|↓ to
MENU A
| | |
ENT EXIT EXIT
S A
ONAR LARMS
|↓ to
MENU A
.
| . Now, any
EXIT
| |↓ to
ENT
LARMS
| .
EXIT
| .
ENT
| |↓ to
ENT
LARMS