Lowrance M56 S/Map Installation And Operation Instructions Manual page 120

Pages can be customized by turning data boxes on or off.
These data boxes (sometimes referred to as text boxes, data windows or
information displays) are controlled with the Customize command. The
boxes usually appear at the edge of the display screen. Information type
is abbreviated on the Map and Navigation pages, but spelled out on the
Position page.
The Position Page boxes cannot be turned off; you can only change what
information type is displayed in each window. In the previous Map Page
figure, the Distance (1.48 mi DST) shown in the top left corner does not
appear in a box. Unboxed text that "floats" on top of the screen is controlled
by the Overlay Data command, discussed later in this section.
Customize Map or Navigation Page
While on the Map or Navigation pages, press
. Press ↓ or ↑ to select a data box you would like to see on the
|
ENT
IZE
page. With the data option highlighted, press
tion is checked and moves to the top of the list.
to return to the page display. Boxes at the bottom of the screen
EXIT
now provide the customized data.
NOTE:
The Map Page can display as many as six data boxes, plus the
steering arrow box. The Navigation Page can display six data boxes.
To turn off a data box, use the same instructions described above to
uncheck a data option.
Customize Position Page
This page has four boxes you can customize. While on the GPS Position
Page, press
MENU
ner begins flashing. Use the arrow keys to select the box you want to
|↓ to
C
USTOMIZE
After all options are set, press
| . The data box in the top left cor-
ENT
114
|↓ to
MENU
ENT. The selected data op-
C
USTOM-