Gps Simulator - Lowrance M56 S/Map Installation And Operation Instructions Manual

change. With the display box highlighted and flashing, press
ENT to
open a list of options. Scroll ↑ and ↓ to select a different data option, then press
ENT.
You can repeat these steps to change the display in another box. When all the
finished, press to return to the page display.
changes are EXIT

GPS Simulator

The GPS simulator lets you use the unit as if you were outdoors navi-
gating somewhere. It's a great way to practice using your unit. You can
set the starting location by entering latitude/longitude (Starting Posi-
tion) or from a stored waypoint or map place location ( com-
C S
HOOSE TART
mand). You can steer and change speed on the map by using the arrow
keys ( command) or by setting the track and speed in
S A
TEER WITH RROWS
the dialog boxes provided on the simulator menu screen.
To get to the GPS Simulator:
1. Press | |↓ to | .
MENU MENU GPS S ENT
ETUP
2. Press ↓ to
| . The GPS Simulator Menu appears.
GPS S ENT
IMULATOR
GPS Setup Menu, left; GPS Simulator menu, center.
Map Page showing Track and Speed steering arrow indicators, right.
In this example, you are "traveling" across Skiatook Lake
on a track of 22º at a speed of 15 miles per hour.
Make the desired settings for Track, Speed and Start location, then
turn the simulator on by highlighting the box and pressing
S O
IMULATOR N
. Press | | to erase this menu. (If you want, you can
ENT EXIT EXIT EXIT
turn on the simulator and the steering arrows at the same time with
one keystroke. Instead of the box, highlight
S O S /
IMULATOR N TEER W
and press .) A message and tone appear periodically, warn-
A ENT
RROWS
ing you that the simulator is on. To turn the simulator off, repeat the
above steps or turn the unit off.
115