The Alarm System; The Alarms Dialog - Lowrance HDS Gen2 Touch Operator's Manual

11

The Alarm system

This unit will continuously check for dangerous situations and
system faults while the system is running. When an alarm situation
occurs, an alarm message will pop up on the screen.
If you have enabled the siren, the alarm message will be followed by
an audible alarm.
The alarm is recorded in the alarm history so you can see the details
and take the appropriate corrective action.

The alarms dialog

The alarms can be setup in the Alarms dialog. This dialog also in-
cludes information about active alarms and alarm history.
The alarms dialog is accessed from the Utilities tab on the home-
screen. Tap an alarm checkbox to activate the alarm.
Turns on/
off all active
alarms
Sets alarm
thresholds
Current
threshold
Set limits
Sets thresholds for alarms that when exceeded will trigger the
alarm. Thresholds are not used on all alarms. If an alarm supports
thresholds, the Set Limit button will be active when the alarm is
selected.
68 |
Alarms | Lowrance HDS Gen2 Touch