Related Manuals for Lowrance iFINDER M-M
Summary of Contents for Lowrance iFINDER M-M
-
Page 1: Operation Instructions
Pub. 988-0148-631 www.lowrance.com Mapping GPS & MP3 Player Operation Instructions offered by www.Busse-Yachtshop.de email: info@busse-yachtshop.de Tel: +49 (0)4347 908234... - Page 2 Copyright © 2004 Lowrance Electronics, Inc. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance. Any unauthorized commercial distribution of this manual is strictly prohibited. iFINDER Map &...
-
Page 3: Table Of Contents
Section 1: Read Me First! ... 1 How iFINDER Works ... 2 Introduction to GPS and WAAS... 4 How to Use this Manual: Typographical Conventions... 4 Section 2: Installation & Accessories... 7 Power ... 7 Batteries ... 7 Cigarette Lighter Power Adapter... 9 Headphone Adapter ... - Page 4 Icons... 35 Create Icon on Map ... 35 Create Icon at Current Position ... 36 Delete an Icon ... 36 Load GPS Data Files from an MMC ... 36 Navigate ... 37 Navigation Display ... 37 Navigation Menu... 38 Set Man Overboard (MOB) Waypoint... 38 Navigate Back to MOB Waypoint ...
- Page 5 Select a Waypoint ... 51 Delete a Waypoint... 51 Edit a Waypoint ... 51 Waypoint Name... 51 Waypoint Symbol ... 51 Waypoint Position ... 51 Waypoint Altitude... 52 Section 5: System & GPS Setup Options ... 53 Alarms ... 53 Auto Satellite Search...
- Page 6 General Trail Options ... 79 Delete All Trails ... 79 Flash Trails on Screen Option... 79 Update Trail Option... 79 Update Trail Criteria (Auto, Time, Distance)... 80 Trail Update Rate (Time, Distance) ... 80 Specific Trail Options ... 81 Delete Trail... 81 New Trail...
-
Page 7: Section 1: Read Me First
Whether you're a first-time user or a professional navigator, you'll dis- cover that the iFINDER is a true pocket-sized, full-featured mapping GPS receiver. When you team an iFINDER with one of our specialized maps or our custom mapping software MapCreate 6, you have an in- credible combination. -
Page 8: How Ifinder Works
Section 4 covers Mapping Mode Operation. It will show you how easy it is to run the iFINDER, right out of the box. This section features a one- page Map Mode Practice Run. (If you've already jumped ahead and figured out how to install the unit yourself, and you just can't wait any longer, turn to the Practice Run on page 32 and head for the road with your GPS unit!) When you come to a GPS menu command on the iFINDER screen, you can... - Page 9 iFINDER listens to signals from as many satellites as it can "see" above the horizon, eliminates the weakest signals, then computes its location in relation to those satellites. Once iFINDER figures its latitude and longi- tude, it plots that position on the moving map shown on the screen. While the screen is updated once a second, your iFINDER is making these in- ternal calculations and determining its position several times a second! The performance doesn't stop there.
-
Page 10: Introduction To Gps And Waas
24 hours a day, in all weather conditions. GPS uses 24 satellites orbiting 10,900 miles above the Earth to transmit position data back to Earth. A GPS receiver proc- esses that data to tell you where you are. - Page 11 Menu Commands A menu command or a menu option will appear in small capital letters, in a bold sans serif type like this: are to select this command or option from a menu or take an action of some kind with the menu item. Text that you may need to enter or file names you need to select are shown in italic type, such as trail name.
- Page 12 Notes offered by www.Busse-Yachtshop.de email: info@busse-yachtshop.de Tel: +49 (0)4347 908234...
-
Page 13: Section 2: Installation & Accessories
Installation & Accessories Power The iFINDER operates from AA batteries or on 3 volts DC using an optional external power cable with a cigarette lighter adapter. When the power cable is used, the iFINDER automatically switches to it if the external power is greater than the battery voltage. - Page 14 Battery Installation Turn the unit over so that the back is facing you. With your thumb or nail, pull back on the small clip to release the battery cover latch as shown in the following images. Once the latch is released, pull the bat- tery cover up out of the grooves in the bottom of the case.
-
Page 15: Cigarette Lighter Power Adapter
Cigarette Lighter Power Adapter To use external DC power: Plug the power cable's cigarette lighter adapter into a cigarette lighter receptacle. Next, pull aside the rubber cover on the bottom of the unit and insert the other connector as shown in the following image. -
Page 16: Nmea Cable Connections
Attach headphone adapter to iFINDER. NMEA Cable Connections NMEA is a standard communications format for marine electronic equipment. For example, an autopilot can connect to the NMEA interface on this unit and receive positioning information. The unit can exchange information with any device that transmits or receives NMEA 0183 data. To exchange NMEA data, Lowrance offers an optional data only cable and a power/data combo cable: The PC-DI7 is a NMEA/serial communications cable. - Page 17 NOTE: Throughout this manual, we will use the term MMC, but just re- member that your unit can use an MMC or SD card to store data. Both of these solid-state flash memory devices are about the size of a postage stamp.
-
Page 18: Freedommaps
4. Press down on the center of the label and slide the card to the right. Add an MMC Card. 5. Turn the plastic rotating card lock until it holds the card firmly in place, with the grip parallel to the direction of the batteries. 6. -
Page 19: External Antenna
External Antenna A GPS antenna requires a clear view of the sky for optimum operation. Inside a vehicle, your iFINDER can sometimes maintain satellite lock while sitting on the seat beside you, but we don't recommend this for optimum performance. Since the "view"... -
Page 20: R-A-M Bracket Mounting Systems
R-A-M Bracket Mounting Systems Several R-A-M mounting brackets are available for your iFINDER. There are permanent mounts and temporary mounts suitable for virtu- ally any boat, aircraft or other vehicle, even motorcycle handlebars. Two R-A-M mounting systems for your unit. One model has a mounting arm and cradle attached to a swivel ball plate that can be screwed or bolted to a supporting surface. -
Page 21: Section 3: Music Mode Operation
Music Mode Operation This section addresses the unit's Music Mode operation. Music Mode is designed as a powerful but simple interface for playing back your music collection while navigating. If you'd rather skip ahead, you can look at Sec. 5, which starts on page 53 and is full of details on setting up and customizing the iFINDER's various options. -
Page 22: Power/Lights On And Off
3. PWR (Power)/LIGHT – The PWR key turns the unit on and off and activates the backlight. 4. ARROW KEYS/Previous Song & Next Song – These keys are used to navigate through the menus, make menu selections, move the map cursor and enter data. When no menus are open, the left and right arrows act as the Skip Previous and Skip Next buttons, to let you move to the beginning of the song before or after the one currently playing. -
Page 23: The Music Mode Display And Keyboard Commands
Point of Interest or map cursor location. GPS Setup command sets the GPS receiver options. System Setup command sets general configuration options. Utilities command lets you access a Sun/Moon rise and set calculator, a trip calculator, an alarm clock and other timers. -
Page 24: Using The Play Control Buttons
of the current song will appear at the top of the screen, as well as the song's quality (in kbps). If you're playing a list, then the play list's name and the song's position in the list are both displayed as well. To switch to Music Mode from Map Mode, press the button. -
Page 25: Using The Songs Key To Launch Music Browser
is shown as a double arrow pointing to the left. PREVIOUS SONG is a double arrow pointing to the right. These correspond to the SONG left and right arrow, respectively. are both on the same button – when the music is play- PLAY &... -
Page 26: Music Mode Practice Run
Music Mode Practice Run Start at your computer. You should already have some MP3 or Ogg Vor- bis music files available. If you need help ripping your CDs to these for- mats, consult the documentation for the CD ripper software. 1. -
Page 27: Play Lists
Play Lists The iFINDER can play both MP3 and Ogg Vorbis music files. It can also recognize m3u-style play list files. Use the key to launch SONGS the Browse Music Files screen. Use the Browse Music Files screen to choose which songs to play next. From the music browser you can choose individual songs, play list files, or subfolders to play. -
Page 28: Power Saving
We'll spend the rest of this section introducing you to the options and settings available from the Music Menu. Power Saving If you're using your iFINDER for both mapping and music, you can con- trol how much of each get out of it. One of the biggest drains on the iFINDER's battery is the position update rate –... -
Page 29: Sounds Menu
Sounds Menu The Sounds command on the Music Menu opens the same Sounds Menu accessible from the Main Menu. We've added this option to the Music Menu for your convenience. From the Sounds Menu you can ad- just the volume of both the unit's internal speaker, and the Line Out volume to your headphones. - Page 30 Notes offered by www.Busse-Yachtshop.de email: info@busse-yachtshop.de Tel: +49 (0)4347 908234...
-
Page 31: Section 4: Map Mode Operation
Map Mode Operation This section addresses the unit's Mapping Mode operation. Mapping Mode includes all navigation features, from finding the nearest restau- rant to plotting a road trip across the country. If you would prefer to start out using the built-in music player, make sure to read Sec. 3, Mu- sic Mode Operation. -
Page 32: Power/Lights On And Off
3. PWR (Power)/LIGHT – The PWR key turns the unit on and off and activates the backlight. 4. ARROW KEYS/Fast Forward-Rewind – These keys are used to navigate through the menus, make menu selections, move the map cur- sor and enter data. 5. - Page 33 Point of Interest or map cursor location. GPS Setup command sets the GPS receiver options. System Setup command sets general configuration options. Utilities command lets you access a Sun/Moon rise and set calculator, a trip calculator, an alarm clock and other timers.
-
Page 34: The Map Mode Display
The Map Mode Display The map screens show your course and track from a “bird’s-eye” view. By default, this unit shows the map with north always at the top of the screen. (This can be changed. See the topic Map Orientation, in Sec. 5.) If you’re navigating to a waypoint, the map shows your starting loca- tion, present position, course line and destination. - Page 35 If you're using only the factory-loaded background map, the maximum zoom range for showing additional map detail is 10 miles. You can con- tinue to zoom in closer, but the map will simply be enlarged without revealing more map content (except for a few major city streets). Load your own high-detail custom map made with MapCreate, and you can zoom in to 0.02 miles (35.2 yards) with massive amounts of accurate map detail.
- Page 36 background map would show you the general outline and approximate shape of a coastline or water body, but the higher detail in MapCreate shows the shoreline completely and accurately (finer detail). Many smaller islands would not be included in the background map, but are, of course, in MapCreate.
- Page 37 Map Page, left, Map Menu, right. The Map Mode has its own menu, which is used to find distances, change the orientation of your map, view map data, and other helpful map functions. To access the Map Menu, in Map Mode, press the MENU key.
-
Page 38: Map Mode Practice Run
Start outdoors, with a clear view of the open sky. As you practice, try navigating to a location a few blocks away. Navigation in too small a space, like a backyard, will constantly trigger arrival alarms. 1. Install two AA batteries (and MMC card if desired) in battery com- partment on back of case. -
Page 39: Find Your Current Position
Find Your Current Position Finding your current position is as simple as turning iFINDER on. Un- der clear sky conditions, the unit automatically searches for satellites and calculates its position in approximately one minute or less. NOTE: "Clear sky" means open sky, unobstructed by terrain, dense foliage or structures. -
Page 40: Moving Around The Map: Zoom & Cursor Arrow Keys
3. Move the cursor to the second position. The rubber band line reap- pears, connecting the first point you set to the cursor. The distance along that line will appear in the lower left-hand corner of the screen. 4. Press to clear the command and return to the page screen. -
Page 41: Selecting Any Map Item With The Cursor
Tip: The iFINDER Map & Music has an extremely handy Cursor Undo feature that lets you instantly return to the previous location you were looking at. It works like this: Use the cursor (arrow keys) to scroll the map to some far away location or waypoint. Press clear the cursor and jump back to your current position on the map. -
Page 42: Create Icon At Current Position
Save icon menu, left, Select symbol menu, right. Create Icon at Current Position 1. While you are traveling, press and hold until the screen shows a "Save Icon" menu, then release the key. 3. Press ← or ↑ or → or ↓ to select your icon symbol, then press The icon appears on the map. -
Page 43: Navigate
1. Press MENU MENU and the screen below appears. The Transfer My Data submenu asks if you want to save data to the MMC or load data from the MMC into iFINDER's memory. 2. The Transfer My Data menu includes a message which tells you if an MMC is present or not. -
Page 44: Navigation Menu
Navigation Page, left, Navigation Menu, right. Navigation Menu The Navigation Menu allows you to return to the map display, cancel navigation, set up alarms, and plan or edit your route. Set Man Overboard (MOB) Waypoint One of boating's most terrifying events is having a friend or family member fall overboard. -
Page 45: Cancel Navigation
Tip: You don't need to have an emergency to use the MOB waypoint. When you set the MOB point, just cancel navigation and then use MOB like a regular waypoint. (Remember, you can set up to 2,000 waypoints.) To cancel navigation to MOB, press . -
Page 46: Navigate To An Icon
3. Press |↓ to MENU gating to the cursor location. The Map Page will display a dotted line from your current position to the cursor position. The Compass Page displays a compass rose showing navigation information to your destination. See the following examples. The 15-mile zoom figure at left clearly shows the dotted course line connecting your current position to your destination. -
Page 47: Navigate To A Waypoint
Navigate to a Waypoint You can select any waypoint visible on the Map Page with the cursor, then use the Navigate to Cursor command. However, you can avoid scrolling the map to pick your waypoint if you use the Find commands: 1. -
Page 48: Backtrack A Trail
Tip: Back Track a Trail Simply running the Navigate command will lead you along the trail from its starting point to its ending point — forward order. You can also back track a trail, or follow it in reverse order (from its ending point to its starting point.) First select the Reverse command to re- verse the trail point order before you start navigating: press →... - Page 49 To load a MapCreate route into iFINDER, follow instructions in Map- Create's manual for creating a route and saving it as part of a GPS Data File (file format *.usr). Copy the GPS Data File to an MMC and insert the MMC in iFINDER. (See Sec. 2 for instructions on installing MMCs.
-
Page 50: Delete A Route
Route creation sequence, continued: Fig. 4. Point (3) set at on-ramp turn. Fig. 5. Waypoint (4) set at highway exit to frontage road leading to river. Waypoint (5) ends the route at a tree stand in the hunting area. Fig. 6. Press EXIT to save the route and you return to this screen. 5. -
Page 51: Searching
3. To save data from iFINDER to the MMC: press 4. To accept the default name "Data" for the GPS Data File, press ↓ to . (If you wish to rename the file, press lection box. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the name is correct. - Page 52 4. If you wish, you could scroll ↑ or ↓ here to select another restaurant, but for now we will just accept the nearest one. Press 5. The POI's Waypoint Information screen appears. (This is how you can use iFINDER as a business phone directory!) If you wanted to navigate there, you could press Enter, since the Go To command is highlighted.
-
Page 53: Trails
NOTE: Search works from mapping and POI data loaded in iFINDER. If you do not have a high-detailed custom map (containing POI data) for the area you are searching loaded on the MMC, you may not find anything. Trails A trail, or plot trail, is a string of position points plotted by iFINDER as you travel. -
Page 54: Transfer Custom Maps And Gps Data Files
Transfer Custom Maps and GPS Data Files Custom Maps: Custom maps work only from the MMC card or SD card. When a card containing a Custom Map File is loaded into the unit, it automatically loads the map into memory when the unit is turned on. Instructions for copying Custom Map Files to an MMC are contained in the instruction manual for your MMC card reader and MapCreate 6 software. -
Page 55: Utilities
4. Loading to unit memory: There may be more than one GPS Data File (*.USR) on the card. To select a file, press tion box, use ↓ or ↑ to highlight the file, then press selection. Next, press ↓ to message when the data transfer is finished. -
Page 56: Create Waypoint At Current Position
2. Press name with a sequential number, such as "waypoint 001." The waypoint symbol and number appear on the map. Create Waypoint at Current Position 1. While you are traveling, press automatically given a name with a sequential number, such as "way- point 002."... -
Page 57: Select A Waypoint
3. Press ↑ to ISTANCE then press → to the next character and repeat until the distance is cor- rect. Press 4. Press ↑ to EARING then press → to the next character and repeat until the bearing is cor- rect. -
Page 58: Waypoint Altitude
4. When latitude and longitude are correct, return to the previous page: press EXIT EXIT EXIT EXIT Waypoint Altitude To edit waypoint altitude: 1. Press |↓ to |↓ to FIND waypoint name| |→ to LTITUDE , then press ↑ or ↓ to change the first character, then press → 2. -
Page 59: Section 5: System & Gps Setup Options
System & GPS Setup Options Alarms This unit has several GPS alarms. The factory default setting has all the alarms turned on. You can turn the alarms off and on and change their distance settings. You can set an arrival alarm to flash a warning message and sound a tone when you cross a preset distance from a waypoint. -
Page 60: Auto Satellite Search
It then searches for only those satellites. When your GPS receiver is turned on for the first time, it doesn't know what your position or elevation (altitude) is. The unit begins searching for the satellites using data that it acquired the last time it was turned on. -
Page 61: Com Port Configuration
At left, the MMC File Browser, with Card Info screen shown at right. Com Port Configuration iFINDER has one NMEA 0183 version 2.0 compatible communication port, or com port for short. The Com Port Menu, which is accessed from the System Setup Menu, allows you to configure the communications port to send data to another electronic device, such as an autopilot. -
Page 62: Coordinate System Selection
1. Press MENU MENU 2. Press ↓ to 3. A menu appears showing the prefixes of the available NMEA sen- tences. A check mark next to a prefix means the prefix is in use. Use ↑ ↓ → ← to select a prefix, then press again to check the box and turn a prefix on.) Configure NMEA menu, showing all prefixes turned on (checked). - Page 63 Menus for changing coordinate system used to display positions. To get to Coordinate System Selection: 1. Press |↓ to |↓ to MENU MENU GPS S ETUP OORDINATE YSTEM 2. Press ↓ to OORD YSTEM This unit can show a position in degrees (36.14952°); degrees, minutes and thousandths of a minute (36°...
-
Page 64: Map Fix
NOTE: If the Loran TD conversion is chosen, you must enter the local Lo- ran chain identification for the master and slaves. Do this by se- lecting "Setup Loran TD" at the bottom of the "Coordinate System" menu and select the ID. Press Map Fix Map Fix is used with charts or maps. -
Page 65: Customize Page Displays
Now press MENU |↓ to ETUP is highlighted. Press CALE ally at the bottom of the paper map. It's shown as a ratio, for example 1:24000. Press EXIT Configure a map fix so iFINDER can find your position on a printed Press ↓... -
Page 66: Simulating Trail Or Route Navigation
tude/longitude (Starting Position) or from a stored waypoint, map place or POI location (Select Starting Waypoint). You can steer your position on the map by using the arrow keys ( track and speed in the boxes provided on simulator screen. To get to the GPS Simulator: 1. -
Page 67: Map Auto Zoom
2. Set to zero. Select PEED which turns on the simulator and returns you to the Map Page. 3. Begin navigating along the trail/route. (If you are close enough to the first waypoint, the arrival alarm will usually go off as soon as naviga- tion begins. -
Page 68: Show Map Data
Show Map Data Press |↓ to MENU selection list, and choose how much detail you want, from Off (so the unit operates like a GPS plotter) to High. After the option is set, press to return to the page display. EXIT Popup Map Information Press... -
Page 69: Map Datum Selection
The distance from your current position to the smaller ring (the ring's radius) is 25 miles (always 1/4 the zoom range). With the arrow keys and map cursor, you can scroll the map to see the third and fourth rings. In this example, the distance to the third ring is 75 miles and distance to the fourth ring is 100 miles from your current position. -
Page 70: Map Detail Category Selection
Map Datum Selection Menu. Map Detail Category Selection This menu determines which of the mapping features are shown on the screen. This includes, waypoints, trails, icons, cities, highways, etc. You can selectively turn on or off any of these items, customizing the map to your needs. -
Page 71: Map Orientation
Map Orientation By default, this receiver shows the map with north always at the top of the screen. This is the way most maps and charts are printed on paper. However, you can change the map orientation to Track Up or Course Up if desired. -
Page 72: Navionics Charts
Navionics Charts Your unit can display Navionics GOLD and CLASSIC format charts are accepted. They work just like a MapCreate custom map on an MMC. Left, entrance to Aransas Pass in a MapCreate 6 custom map, 4 mile zoom. Remaining images, from left to right: same position on Navionics GOLD... -
Page 73: Port Information
3. To turn off a Navionics chart, From the Map Page, press |↓ to press EXIT EXIT Port Information Navionics charts contain Port Services information, represented by an- chor icons on the map display. These icons appear at the 2 nautical mile zoom range. -
Page 74: Tidal Current Information
Port Services information screens. 4. Depending on the location, the Detailed Services window may have a long list of services under the General Services category. To scroll , press ↓ through the Detailed Services window: from ERVICE ATEGORIES , then use ↑ or ↓ to read the list of available ETAILED ERVICES services. - Page 75 To view Tidal Current information: 1. Use the arrow keys to move the cursor over a Tidal Current Station icon. When selected, a pop-up name box appears. 2. Press FIND FIND Cursor lines Left, Navionics chart showing Tidal Current Station icon selected by cursor.
-
Page 76: Tide Information
You can look up tidal current data for other dates by changing the month, day and year selection boxes. To select another date: 1. Use → and ← to highlight month, day or year, then press 2. Use ↑ and ↓ to select the desired month, day or year, then press To clear the information screen, press Tide Information Navionics... -
Page 77: Pop-Up Help
The Tide Information screen displays daily tidal data for this station on this date at the present time. The graph at the top of the screen is an approximate view of the tidal range pattern for the day, from midnight (MN), to noon (NN) to midnight (MN). -
Page 78: Power Saving
This example shows the Pop-up Help message for the Screen com- Power Saving iFINDER contains a battery capacity indicator, and will also flash low battery warning messages when battery power declines to a certain level. When plugged into the DC cigarette lighter adapter, the power indicator displays the "External Power"... -
Page 79: Reset Options
of batteries, remember: a prudent navigator never depends on only one source of navigation information. A good map and compass are impor- tant companions for you and your iFINDER. To access the Power saving feature: 1. Press MENU MENU 2. Press → or ← to move the slider bar. The left end of the scale is minimum power saving (full battery power);... - Page 80 Screen Menu, with Contrast bar selected. To adjust the display's brightness: Press ↓ to . Press → or ← to move the bar. The left end of the RIGHTNESS scale is minimum contrast; the right end is maximum contrast. To adjust the screen's display mode: Press ↓...
-
Page 81: Satellite Status Screen
Light Delay menu. Setting shown is "continuous," which is ideal for night travel in a vehicle on external power. Satellite Status Screen This command provides detailed information on the status of the iFINDER's satellite lock-on and position acquisition. On any Map Mode display a flashing current position indicator/question mark symbol and flashing GPS data displays indicate that satellite lock has been lost and there is no position confirmed. -
Page 82: Set Language
Set Language This unit's menus are available in 10 languages: English, French, Ger- man, Spanish, Italian, Danish, Swedish, Russian, Dutch and Finnish. To select a different language: 1. Press MENU MENU 2. Press ↓ to ANGUAGE 3. Use ↓ or ↑ to select a different language and press now appear in the language you selected. -
Page 83: Software Version Information
Adjusting the time, left, Adjusting the month, right. The last field in this menu is . This feature allows your unit ONFIG to automatically adjust with the time change caused by Daylight Sav- ing Time (you should only have to set it once). You may select which set of rules matches DST in your region, or simply accept the default. -
Page 84: Sounds And Alarm Sound Styles
↓ to 1. Press |↓ to MENU MENU ENT| YSTEM ETUP OFTWARE 2. Read the information displayed on the screen. 3. To return to the previous display, press EXIT EXIT Sounds and Alarm Sound Styles Sounds triggered by key strokes and alarms can be adjusted. The unit has an internal speaker (controlled using the Pizeo Volume slider) for playing alarms and notification beeps, and is also capable of playing sounds through an external speaker connected to the power port (con-... -
Page 85: Track Smoothing
Track Smoothing This is a factory setting that should always be left on. When stopped or traveling at slow speeds (such as walking or trolling), Track Smoothing prevents wandering of trails, the steering arrow, compass rose and a map in track-up mode. Trail Options There are several options you can use with trails. -
Page 86: Update Trail Criteria (Auto, Time, Distance)
WARNING: If you uncheck the Update Trail option, automatic trail creation and recording will be turned off, and you must turn it back on to record trails. The default setting is on. Press ↓ or ↑ to PDATE check it (turn on) and uncheck it (turn off.) Update Trail Criteria (Auto, Time, Distance) The options are automatic, time, or distance. -
Page 87: Specific Trail Options
Specific Trail Options Delete Trail To delete a specific trail: From the Trails menu, press ↓ to trail name| . The Edit Trail menu appears as seen in the following fig- ure. Press ↓ to ELETE New Trail To manually start a new trail or delete a trail: From the Trail Options Menu, press →... -
Page 88: Units Of Measure
Units of Measure This menu (shown in the following image) sets the speed and distance (statute or nautical miles, meters), depth (feet, fathoms, or meters), al- titude (feet or meters) and heading (true or magnetic) units. To change the units, press MENU To set Speed/Distance Unit of Measure: Press change the Speed/Distance, then press... -
Page 89: Section 6: Searching
Section 6: Searching NOTE: The background map loaded in your unit lets you search for U.S. Interstate Highway exits and exit services, as well as some land features, including cities and lakes. For a full set of searchable land features, including landmarks, streets, addresses and Points of In- terest, you must load your own high-detail custom map produced with our MapCreate 6 software. - Page 90 2. Press to search in the Address field. 3. To enter an address number, press ↑ or ↓ to change the first number, then press → to move the cursor to the next number and repeat until the number is correct, then press previous page, press 4.
- Page 91 5. To enter a city name, press ↓ to want to find addresses only within a particular city. This option is de- signed so you can limit an address search to a single city if necessary (see the note below). If you select yes, there are two options: A.
-
Page 92: Find Any Item Selected By Map Cursor
Find Any Item Selected by Map Cursor With a POI or map feature selected by the cursor, press return to the previous page, press A POI selected by the cursor, left, The Find Menu, center, POI informa- NOTE: Since the Go To command is highlighted, you can navigate to the selected POI by pressing tion screen. -
Page 93: Find Map Places Or Points Of Interest (Poi)
3. Once you have selected a highway name you can then select an exit. Press ↓ to switch to the Exit List, then press ↓ or ↑ until you highlight the exit you want, then press 4. In the Exit Information screen you have two choices. A. Press navigate or "go to"... - Page 94 2. Press ↓ or ↑ to select a Map Place or POI category then press (To narrow your search, press ← or → to select a subcategory before pressing .) You will be given two options: Search by Name or by Nearest.
-
Page 95: Find Streets Or Intersections
Find by name option, left, Find by name menu, right. 5. When the POI's Waypoint Information screen appears, you can choose to "Go To" the POI by pressing or find it on the map by pressing →| "Go To" POI option, left, "Find on Map" POI option, right. Find Streets or Intersections Find a Street 1. - Page 96 Find streets or intersections menu, left, Find street by name, right. 3. The Find Streets menu reappears with the street you're searcing for in the First Street box. (In this example, it's 80th Street.) To search for that street, press ↓ to .
- Page 97 2. You must first fill in a screet name in the First Street dialog box. Press to display the Find By Name menu. There are two options: A. You can spell out the street in the top selection box. Press ↑ or ↓ to change the first letter, then press →...
-
Page 98: Find Waypoints
If you want to navigate to the found intersection, just press MENU EXIT Find Waypoints 1. Press FIND 2. If searching for the Nearest waypoint, press . If searching for a waypoint By Name, press ↓ to . (To search by name, jump to step 5 below.) Find menu, left, and Find By Nearest, center, Find by Name, right. - Page 99 A. To navigate to the waypoint, press press point command is already highlighted.) The unit will show naviga- tion information to the waypoint. B. To find the waypoint, press → to appears with the cursor highlighting the found waypoint. To clear the menus and return to the previous page, press 5.
- Page 100 Notes offered by www.Busse-Yachtshop.de email: info@busse-yachtshop.de Tel: +49 (0)4347 908234...
-
Page 101: Section 7: Supplemental Material
Section 7: Supplemental Material Datums Used by This Unit WGS 1984 Default Adindan Mean for Ethiopia, Sudan Adindan Burkina Faso Adindan Cameroon Adindan Ethiopia Adindan Mali Adindan Senegal Adindan Sudan Afgooye Somalia Ain el Abd 1970 Bahrain Ain el Abd 1970 Saudi Arabia Anna 1 Astro 1965 Cocos Islands... - Page 102 Chua Astro Paraguay Corrego Alegre Brazil Dabola Guinea Djakarta (Batavia) Indonesia (Sumatra) DOS 1968 New Georgia Islands (Gizo Island) Easter Island 1967 Easter Island European 1950 Mean for Austria, Belgium, Denmark, Finland, France, West Germany, Gi- braltar, Greece, Italy, Luxembourg, Neth- erlands, Norway, Portugal, Spain, Sweden, Switzerland...
- Page 103 Naparima BWI Trinidad & Tobago North American 1927 Mean for Antigua, Barbados, Barbuda, Caicos Islands, Cuba, Dominican Republic, Grand Cayman, Jamaica, Turks Islands North American 1927 Mean for Belize, Costa Rica, El Sal- vador, Guatemala, Honduras, Nicaragua North American 1927 Mean for Canada North American 1927 Mean for CONUS...
- Page 104 Point 58 Sweden Santo (DOS) 1965 Espirito Santo Island Sao Braz Azores (Sao Miguel, Santa Maria Islands) Sapper Hill 1943 East Falkland Island Schwarzeck Nambia Selvagem Grande Salvage Islands SGS 85 Soviet Geodetic System 1985 South American 1969 Mean for Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay,...
-
Page 105: Fcc Compliance
FCC Compliance This device complies with Part 15 of the U.S. Federal Communi- cations Commission (FCC) Rules. Operation is subject to the fol- lowing two conditions: (1) this device may not cause harmful in- terference, and (2) this device must accept any interference re- ceived, including interference that may cause undesired opera- tion. - Page 106 Notes offered by www.Busse-Yachtshop.de email: info@busse-yachtshop.de Tel: +49 (0)4347 908234...
-
Page 107: Index
Accessories, 1, 2, 4, 12, 13, 14, 48 Sec. 2, Installation & Accessories, 7 Alarm Clock, 49 Alarms, 17, 27, 32, 42, 53, 54, 61 Anchor Alarm, 53, 54 Antenna, 2, 13, 99 Arrival Alarm, 32, 42, 53, 54, 61 Backlights / Lighting, 16, 20, 26, 74, 75 Batteries, 1, 7, 8, 11, 12, 17, 22, 32, 72, 73, 82... - Page 108 22, 23, 25, 32, 72, 82 Navigating, 37, 38, 39, 40, 41, 42, 44, 54 A Route, 39 A Trail, 41, 42 Cancel, 17, 27, 32, 39, 40, 42 To Cursor Position, 39 To Icon, 40 To POI, 40 To Waypoint, 41 Trail, 42 Navigation Menu, 38 Nearest, 25, 41, 45, 46, 83, 88, 92...
- Page 109 Waypoint Information Screen, 35, 46, 86, 88, 89, 92, 93 Waypoints, 2, 3, 10, 17, 27, 28, 32, 35, 36, 37, 38, 39, 41, 42, 43, 44, 46, 48, 49, 50, 51, 52, 53, 54, 57, 58, 59, 60, 61, 64, 65, 73, 76, 80, 86, 88, 89, 92, Delete, 51 Edit, 51 offered by www.Busse-Yachtshop.de...
- Page 110 Notes offered by www.Busse-Yachtshop.de email: info@busse-yachtshop.de Tel: +49 (0)4347 908234...
- Page 111 LOWRANCE DATABASES LICENSE AGREEMENT THIS IS A LEGAL AGREEMENT BETWEEN THE END-USER WHO FIRST PURCHASES THIS PRODUCT AS A CONSUMER ITEM FOR PERSONAL, FAMILY, OR HOUSEHOLD USE ("YOU") AND LOWRANCE ELECTRONICS, INC., THE MANUFACTURER OF THIS PRODUCT ("WE", "OUR", OR "US"). USING THE PRODUCT ACCOMPANIED BY THIS LICENSE AGREEMENT CONSTITUTES ACCEPTANCE OF THESE TERMS AND CONDITIONS.
-
Page 112: Databases Limited Warranty
DATABASES LIMITED WARRANTY "We", "our", or "us" refers to Lowrance Electronics, Inc., the manufacturer of this product. "You" or "your" refers to the first person who purchases the prod- uct as a consumer item for personal, family, or household use. The Databases Limited Warranty applies to the one or more databases that your product may contain. - Page 113 LOWRANCE ELECTRONICS FULL ONE-YEAR WARRANTY "We," "our," or "us" refers to LOWRANCE ELECTRONICS, INC., the manufacturer of this product. "You" or "your" refers to the first person who purchases this product as a consumer item for personal, family or household use. We warrant this product against defects or malfunctions in materials and workmanship, and against failure to conform to this product's written specifications, all for one (1) year from the date of original purchase by you.
-
Page 114: How To Obtain Service
How to Obtain Service… …in the USA: We back your investment in quality products with quick, expert service and genuine Lowrance parts. If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. - Page 115 Accessory Ordering Information for all countries To order Lowrance GPS accessories, please contact: 1) Your local sporting goods, marine, aviation, automobile or consumer electronics store. Most quality dealers that handle outdoor electronic equipment or other consumer electronics should be able to assist you with these items.
-
Page 116: Visit Our Web Site
Visit our web site: Lowrance Pub. 988-0148-631 © Copyright 2004 All Rights Reserved Printed in USA 101404 Lowrance Electronics, Inc. offered by www.Busse-Yachtshop.de email: info@busse-yachtshop.de Tel: +49 (0)4347 908234...