Lowrance LMS-332C Installation And Operation Instructions Manual page 87

To remove overlaid data:
1. While on the Page that shows the item or items you want to remove,
press |↓ to
MENU
2. You'll see a list of the overlay data currently displayed. Select the
item you want to remove from your display and press
move the data. To remove another item, select the item and press
| .
ENT ENT
3. When you have finished removing all the items you want from the
screen, press
EXIT
NOTE
You can also remove data directly from the Data Viewer menu by un-
checking the data option you would like to remove.
Overlay Data Shown, with Date option selected (left). Press ENT to ac-
cess R option (center). Press ENT again to remove item and return
EMOVE
To move overlaid data:
You may find it useful to rearrange data that is floating in your display
window.
1. From one of the Map Pages, press
2. You'll see a list of the overlay data currently displayed. Select the
item you want to move and press
3. The data begins to flash on your screen. Use any combination of →,
←, ↑ and ↓ to move the data to a new location on the screen.
4. When satisfied, press
NOTE:
The Customize command and the Overlay Data command both use
the same information categories. The difference between the two
|
O D
VERLAY ATA
to return to the page display.
to Overlay Data Shown (right).
|
EXIT EXIT
.
ENT
|↓ to
MENU
|→ to
ENT M
.
79
ENT
O D
VERLAY ATA
| .
ENT
OVE
| to re-
ENT
| .
ENT