Navigate A Route - Lowrance LMS-332C Installation And Operation Instructions Manual

3. Use ↓ and ↑ to select a command from the Edit Route Waypoints
menu and press
route by clicking on a map location with the cursor. Add Waypoint calls
up the Waypoint List so you can insert a waypoint from the list. Re-
move Waypoint will delete the waypoint from the route. View Waypoint
will show you where the selected waypoint is on the map.
NOTE:
When adding waypoints to a route, the inserted waypoints will ap-
pear in the route in front of the waypoint you have selected. To in-
sert waypoints at the end of the route, make sure to select "(End of
route)" before adding them.

Navigate a Route

1. From the
N
press |
MENU MENU
Route Planning command on Main Menu, left; Routes menu, center; Edit
Route menu, right. Navigate command is selected in the Action box.
2. Press ↓ to select route name|
Edit Route Waypoints menu.
. Add From Map lets you insert a waypoint in the
ENT
, press
P
AVIGATION AGE
|↓ to
R
OUTE
|
MENU ENT
| .
P ENT
LANNING
|↓ to
ENT N
AVIGATE
142
or from the
M
| .
ENT
,
P
AP AGE