Show Map Data; Pop-Up Map Information; Map Boundaries; Fill Water With White - Lowrance LMS-332C Installation And Operation Instructions Manual

Show Map Data

From the Map Page, press
the
E M
ARTH AP
want, from Off (so the unit operates like a GPS plotter) to High. After
the option is set, press

Pop-up Map Information

From the Map Page, press
M I
AP NFORMATION
on) or uncheck it (turn off.) After the option is set, press
return to the page display.

Map Boundaries

From the Map Page, press
M B
AP OUNDARIES
on) or uncheck it (turn off.) After the option is set, press
return to the page display.

Fill Water With White

From the Map Page, press
W W W
ATER ITH
(turn on) or uncheck it (turn off.) After the option is set, press
| to return to the page display.
EXIT EXIT

Map Overlays (Range Rings; Lat/Long Grid)

The map screen can be customized with four range rings and/or grids
that divide the plotter into equal segments of latitude and longitude.
Range rings are handy for visually estimating distances on the map. The
ring diameters are based on the current zoom range. For example: at the
100 mile zoom, the screen will show two rings with your current position
in the center. The large ring touching the left and right sides of the
screen is 100 miles in diameter (same as the zoom range). The second
smaller ring is 50 miles in diameter (always 1/2 the zoom range).
Map Menu, left, Map Data Menu, right.
MENU
selection list, and choose how much detail you
D
ETAIL
EXIT
. With the option highlighted, press
. With the option highlighted, press
. With the option highlighted, press
HITE
|↓ to
M
AP
repeatedly to return to the page display.
|↓ to
MENU M
AP
|↓ to
MENU M
|↓ to
MENU M
159
| . Press
D ENT
ATA
. Press ↓ to
|
D ENT
ATA
ENT
. Press ↓ to
|
D ENT
AP ATA
ENT
. Press ↓ to
|
D ENT
AP ATA
to enter
ENT
P
OPUP
to check it (turn
|
EXIT EXIT
D
RAW
to check it (turn
|
EXIT EXIT
F
to check it
ENT
to
to
ILL