Section 9: Searching; Find Streets - Lowrance LMS-332C Installation And Operation Instructions Manual

NOTE:
The background map loaded in your unit lets you to search for U.S.
Interstate Highway exits and exit services, as well as some land
features, including cities and lakes. For a full set of searchable land
features, including landmarks, streets and Points of Interest, you
must load your own high-detail custom map produced with our
MapCreate 6 software. For a complete description of what detail is
found in the background map and custom MapCreate maps, see
page 108. (Remember, our pre-made FreedomMaps contain all the
same detail found in custom-made MapCreate maps.)
This unit's varied search functions all begin with either the Find Way-
point menu or the Map Page menu. Press
menu appears for waypoints and Points of Interest (POI). From the
Map Page, press
highway exits.
Find Waypoint menu, left; Map Page menu, right.
NOTE:
You can search for items after the unit has acquired a position, or
while using the unit in the "indoor" simulator mode. Distance and
bearing to the selected item will be calculated from the unit's cur-
rent position, or the last known position if operating indoors (with-
out a position determined). You can look up items by name, or
search for the item nearest to you.

Find Streets

1. From the Map Page, press

Section 9: Searching

and the Map Page menu appears for streets and
MENU
MENU
WPT
|↓ to
F S
IND TREETS
183
and the Find Waypoint
| .
ENT