Displaying A Saved Trail; Navigating Trails - Lowrance LMS-332C Installation And Operation Instructions Manual

Tip:
Another quick way to stop recording one trail and begin a new one
is to use the New Trail command: Press
|
T ENT
RAILS
Caution:
You also have the option of completely turning off trail record-
ing, under the trail Options command. However, if the Update
Active Trail option is turned off, it will cancel the automatic
trail creation feature.

Displaying a Saved Trail

The active trail is automatically displayed on the map (the "Visible"
option) with the factory default settings. You can selectively turn trail
display off and on for any saved or active trail. In the Saved Trails List,
visible trails have a check mark in front of the trail name.
To turn off trail display:
1. Press
MENU
2. Press ↓|↓ to enter the Saved Trail list, then use ↑ or ↓ to select the
desired Trail Name|
3. Press ↓ to
press |
EXIT EXIT
To turn on trail display:
1. Press
MENU
2. Press ↓|↓ to enter the Saved Trail list, then use ↑ or ↓ to select the
desired Trail Name|
3. Press ↓ to
press |
EXIT EXIT

Navigating Trails

There are three methods for following a trail: visual trailing, navigating
a trail (forward) and backtracking a trail (backward). Try each method
to see which you prefer.
Visual trailing is the simplest method. It uses only the Map Page and
requires no menu commands at all. The technique works the same if
you are running a trail forward (from start to end) or backward (from
end to start.) However, visual trailing provides no navigation informa-
tion during the trip, such as the time to your destination.
| .
ENT
| |↓ to
MENU M
.
ENT
|→ to
A V
CTIVE
| |
EXIT EXIT
| |↓ to
MENU M
.
ENT
|→ to
A V
CTIVE
| |
EXIT EXIT
| .
T ENT
Y RAILS
| . To return to the previous page,
ENT
ISIBLE
.
| .
T ENT
Y RAILS
| . To return to the previous page,
ENT
ISIBLE
.
128
| |↓ to
MENU MENU M
Y