Depth Range - Manual; Depth Range - Upper And Lower Limits - Lowrance LCX-17M Installation And Operation Instructions Manual

Sonar Page menu with Depth Range command selected (left); The
2. The Depth Range Control Scale appears. Press ↑ or ↓ to select a
different depth range. A black bar highlights the selected range. The
shaded numbers can not be selected.
3. When the new range is selected, press

Depth Range - Manual

You have complete control over the range when the unit is in the
manual mode. There are 16 depth ranges, from 5 to 4,000 feet.
To switch to Manual Depth Range:
1. First, turn off automatic depth range. From the Sonar Page, press
to
MENU|↓ A
UTO
2. Press ↑ to
D
3. Press ↓ or ↑ to select a different depth range. A horizontal black bar
highlights the selected range.
4. When the new range is selected, press
To turn Auto Depth Range on again:
From the Sonar Page, press
NOTE:
The sonar's
installation, water and bottom conditions, and other factors.

Depth Range - Upper and Lower Limits

Virtually any segment of the water column can be displayed by using
the upper and lower limit feature. This lets you pick the shallow and
deep range limits shown on the screen, provided there is at least 10 feet
between the upper and lower limit you select. For example, a range
from 12 feet to 34 feet could be used.
Depth Range Control Scale (right).
|
D R
EPTH ANGE
|
R ENT
EPTH ANGE
depth
EXIT
.
ENT
and the Depth Range Control Scale appears.
EXIT
to
MENU|↓ A
UTO
capability depends
67
to clear the menu.
to clear the menu.
|
D R ENT|EXIT.
EPTH ANGE
on the transducer