Update Trail Criteria (Auto, Time, Distance)
The options are automatic, time or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're
traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
plot trail points. If a plot trail uses all of the available points allotted to
it, the beginning points are taken away and placed at the end of the trail.
From the Trails Menu, press → to
↑
↓
to select criteria type|
Press
or
Rate data entry box appears on the menu. If you selected Distance, the
Update Distance data entry box appears on the menu.
Trail Update Rate (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999
seconds; the default is 3 seconds. You can update by distance, with a
range from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10
miles.
With one of the Update Criteria selected, use the cursor arrows to
highlight either the
boxes and press
→
press
to the next character and repeat until the entry is correct.
Press
to return to the Trail Options Menu.
EXIT
Update Time Rate (left) and Update Distance(right).
Specific Trail Options
Delete Trail
To delete a specific trail, from the Trails Menu, press ↓ to
|
. Select a trail and press
Trails
ENT
seen in the following figure. Press
U
R
PDATE
ATE
↑
. Press
ENT
T
O
RAIL
PTIONS
. If you selected Time, the Update
ENT
or
(T
)
U
IME
↓
or
to change the first character, then
. The Edit Trail menu appears as
ENT
→
to
D
ELETE
166
|
to
ENT|↓
U
PDATE
D
PDATE
ISTANCE
|
to
T
ENT|←
RAIL
.
C
RITERIA
data entry
Saved
Y
|ENT.
ES